| MODEL |
DY-530C |
DY-630C |
DY-730C |
| Machining Capability |
Distance Between Centers |
1000 / 1500 / 2000 / 3000 / 4000 |
| Swing Over Bed |
530 mm |
630 mm |
730 mm |
| Swing Over Cross Slide |
310 mm |
410 mm |
510 mm |
| BED |
Width |
435 mm |
| Main Spindle |
Spindle Nose |
D1 - 8, 104 mm: L: 50 - 300, H: 300 - 2000 rpm
D1 - 11, 130 mm: L: 50 - 300, H: 300 - 1500 rpm |
| Spindle Bore |
| Spindle Speed (rpm) |
| Spindle Taper |
MT10 or MT15 |
| Travel |
Cross Travel (X Axis) |
360 mm |
| Longitudinal Travel (Z Axis) |
700 / 1200 / 1700 / 2700 / 3700 mm |
| Feeds |
X Axis Rapid Traverse |
5 M/min |
| Z Axis Rapid Traverse |
7.5 M/min |
| Cutting Feed Rate |
0.001 - 500 mm/rev (0.0004" - 20"/rev) |
| Motors |
Main Motor |
20 Hp |
| Inverter |
20 Hp |
| X Axis Servo Motor |
Siemens or Fanuc or Fagor AC servo motor
FXM53 / 2.49 kw, 11.9 Nm / 2000 rpm |
| Z Axis Servo Motor |
Siemens or Fanuc or Fagor AC servo motor
FXM73 / 4.36 kw, 20.8 Nm / 2000 rpm |
| Oil Pump |
80 W |
| Coolant Pump |
1/2 Hp |
| Hydraulic Tank Pump (Optional) |
3 Hp (2.2 kw) |
| Tank Capacity |
Hydraulic Tank (Optional) |
20 L |
| Lubrication Pump |
2 L |
| Ball Screw |
X Axis Diameter |
25 mm / pitch 5 |
| Z Axis Diameter |
50 mm / pitch 10 |
| Tailstock |
Quill Diameter |
90 mm |
| Quill Travel |
203 mm |
| Quill Taper |
MT5 |
| Length (mm) |
3390 / 3890 / 4390 / 5390 / 6390 |
| Width (mm) |
2180 |
| Height (mm) |
1730 |
| N.W (kg) |
3500 / 3650 / 3800 / 4100 / 4500 |
| * Above specifications are subject to change without notice. Special requirement please connect with us. |
