| MODEL |
DY-2000C |
DY-2100C |
DY-2200C |
DY-2300C |
| Machining Capability |
Distance Between Centers |
2000 / 3000 / 4000 / 5000 / 6000 / 7000 / 8000 / 9000 / 10000 / 11000 / 12000 ~ 40000 mm |
| Swing Over Bed |
2000 mm |
2100 mm |
2200 mm |
2300 mm |
| Swing Over Cross Slide |
1460 mm |
1560 mm |
1660 mm |
1760 mm |
| Bed |
Width |
1150 mm |
| Main Spindle |
Spindle Nose |
A2-15, 230 mm, L: 20-97, M: 97-200, H: 200-400
A2-20, 310 mm, L: 20-97, M: 97-200, H: 200-350
A2-20, 360 mm, L: 20-97, M: 97-200, H: 200-300
A2-28, 410 mm, L: 20-97, M: 97-200, H: 200-250 |
| Spindle Bore |
| Spindle Speed (rpm) |
| Travel |
Cross Travel (X Axis) |
1000 mm |
1050 mm |
1100 mm |
1150 mm |
| Longitudinal Travel (Z Axis) |
Same as distance between centers |
| Feeds |
X Axis Rapid Traverse |
5 M/min |
| Z Axis Rapid Traverse |
5 M/min |
| Cutting Feed Rate |
0.001 - 500 mm/rev (0.0004" - 20"/rev) |
| Motors |
Main Motor |
Siemens spindle motor 1PH7184-NF, 51 kw, 325 Nm |
| Inverter |
--- |
| X Axis Servo Motor |
Siemens or Fanuc or Siemens servo motor 1FK7103-5AF71, 18 Nm, 3.37 kw, 3000 rpm |
| Z Axis Servo Motor |
Siemens or Fanuc or Siemens servo motor 1FK7103-5AF71, 48 Nm, 8.17 kw, 3000 rpm |
| Oil Pump |
100 W |
| Coolant Pump |
450 W, 6 ~ 10 bar |
| Hydraulic Tank Pump (Optional) |
3 hp (2.2 kw) |
| Tank Capacity |
Hydraulic Tank (Optional) |
20 L |
| Lubrication Pump |
8 L |
| Ball Screw |
X Axis Diameter |
50 mm |
| Z Axis Diameter |
80 mm |
| Tailstock |
Quill Diameter |
250 mm |
| Quill Travel |
500 mm |
| Quill Taper |
MT7 |
| Length (mm) |
7430 / 8430 / 9430 / 10430 / 11430 / 12430 / 13430 / 14430 / 15430 / 16430 / 17430 ~ |
| Width (mm) |
3405 / 3505 / 3605 / 3705 |
| Height (mm) |
3020 / 3070 / 3120 / 3170 |
| N.W (kg) |
24000 / 26000 / 28000 / 30000 / 32000 / 34000 / 36000 / 38000 / 40000 / 42000 / 44000 ~ |
| * Above specifications are subject to change without notice. Special requirement please connect with us. |
