| MODEL |
DY-2000VS |
DY-2100VS |
DY-2200VS |
DY-2300VS |
| SWING |
Distance Between Centers |
2000/3000/4000/5000/6000/7000/8000/9000/10000/11000/12000/13000/14000/
15000/16000/17000/18000/19000/20000/21000/22000/23000/24000/25000mm (Within 40000 is avaiable) |
| Height of Center (Over Bed) |
1000 mm |
1050 mm |
1100 mm |
1050 mm |
| Swing Over Bed |
2000 mm |
2100 mm |
2200 mm |
2300 mm |
| Swing Over Cross Slide |
1400 mm |
1500 mm |
1600 mm |
1700 mm |
| BED |
Bed Width |
1150mm |
| HEADSTOCK |
Spindle Nose |
A2-15 |
A2-20 |
A2-20 |
A2-28 |
| Spindle Bore |
230 mm |
310mm |
360mm |
410mm |
| Spindle Speed (rpm) |
L: 20~97,
M: 97~200,
H: 200~400
|
L: 20~97,
M: 97~200,
H: 200~350
|
L: 20~97,
M: 97~200,
H: 200~300
|
L: 20~97,
M: 97~200,
H: 200~250
|
| Number of Feed Changes |
3 steps Variable Speed, Auto gear shift |
| Leadscrew |
Ø80 mm. 2T.P.I. or 12 pitch |
| FEEDS - THREAD |
Longitudinal Feed Range |
0.259 ~ 14.488 mm/rev |
| Cross Feed Range |
0.0173 ~ 0.968 mm/rev |
| Inch Threads |
54 kinds, 1/2~28 T.P.I. |
| Metric Threads |
63 kinds, 0.5~56mm |
| TOOL SLIDE |
Cross Slide Travel |
1300 mm |
| Compound rest travel |
350mm |
| TAILSTOCK |
Quill Travel |
450mm |
| Quill Diameter |
300mm (Rotary quill with spindle nose A1-8) |
| Taper of Center |
MT#6 / MT#7(Opt) |
| MOTOR |
Main Motor |
60HPx4P |
| Rapid Feed Motor |
3HP |
| Coolant Pump |
2 HP |
| Length (mm) |
6300/7300/8300/9300/10300/11300/12300/13300/14300/15300/16300/
17300/18300/19300/20300/21300/22300/23300/24300/25300/26300/27300/28300/29300mm |
| Width (mm) |
2500 mm |
| Height (mm) |
2150 |
2200 |
2250 |
2300 |
| N.W (kg) |
13000/17000/21000/25000/29000/33000/37000/41000/45000/49000/53000
57000/61000/65000/69000/73000/77000/81000/85000/89000/93000/97000/101000/105000kg |
