MODEL DY-680G DY-780G DY-880G DY-980G SWING Distance Between Centers 1100 / 1600 / 2000 / 2500 / 3000 / 3500 / 4000 / 5000 / 6000 / 7000 / 8000 mm Swing Over Bed 680 mm 780 mm 880 mm 980 mm Swing Over Cross Slide 440 mm 540 mm 640 mm 740 mm Over gap swing (mm) 970 x 482 1070 x 482 1170 x 482 1270 x 482 Height of Center (Over Bed) 340 mm 390 mm 440 mm 490 mm BED Width 458 mm HEADSTOCK Spindle Nose A2-11 or D1-11 / A2-11 or D1-11 / A2-15 Spindle Bore 105 mm(Sta)/ 155 mm (Opt.) / 230 mm ( Opt for 880/980) Spindle Speed (rpm) 15, 24, 32, 45, 60, 95, 130, 180, 340, 530, 720, 1000 / 14, 22, 30, 40, 50, 80, 110, 150, 280, 430, 600, 800 / 5, 9, 14, 17, 26, 41, 60, 140, 190, 290, 450 / Number of Spindle Speed 12 steps FEEDS - THREAD Leadscrew Ø45 mm. 2T.P.I. or 12 pitch Number of Feed Changes 28 Longitudinal Feed Range 0.05 ~ 0.70 mm/rev Cross Feed Range 0.025 ~ 0.35 mm/rev Inch Threads 2~28 T.P.I, (36 Kinds) Metric Threads P0.8~14mm, (65 Kinds) D.P. No. / range D.P 4~56 (36 Kinds) Module Pitches No. / Range MOD 0.5~7 (22 Kinds) TOOL SLIDE Cross Slide Travel 390 mm 390 mm 390 mm 520 mm Compound Rest Travel 240 mm TAILSTOCK Quill Travel 210 mm Quill Diameter 105 mm Taper of Center MT#6 MOTOR Main Motor 15 HP / 4P, 20 HP / 4P (Opt) Rapid Feed Motor 1/4 HP Coolant Pump 1/8 HP Length (mm) 2750 / 3250 / 3750 / 4250 / 4750 / 5250 / 5750 / 6750 / 7750 / 8750 / 9750 / 10750 / 11750 Width (mm) 1300 Height (mm) 1350 1400 1450 1500 N.W (kg) 3300 / 3600 / 3900 / 4200 / 4500 / 4800 / 5100 / 6100 / 7200 / 8300 / 9500 / 10700 / 11900 Workpiece Weight Capacity Chuck only Chuck + Tailstock Chuck + 1 Steady rest + Tailstock Chuck + 2 Steady rest + Tailstock Spindle bore 105mm 600kg 1700kg 2700kg 4000kg Spindle bore 155mm 1000kg 2000kg 3000kg 5000kg Spindle bore 230mm 1400kg 2400kg 3400kg 5400kg * Above specifications are subject to change without notice. Special requirement please connect with us. DY-680G-980G.pdf
Related Products Manual Lathes DY-410GB~510G (BED 330MM) Manual Lathes DY-1600G~2000G (BED 888MM) Manual Lathes DY-560G~760G (BED 410MM) Manual Lathes DY-1100G~1500G (BED 692MM)
